Flights must be flown in realtime mode ( 1x sim rate . no accelerated mode allowed ) . concorde or other supersonic a / c are also forbidden 飛行過程必須遵循真實情況(禁止開倍速飛行) ,協和等其它超音速機型被列為禁止使用機型
The paper essentially research application of computer graphics processing and simulation of object oriented technique at visual emluator of drilling simulator . and stressfully research computer graphics processing together with give part realization . elaborating characteristic of graphics processing based on opengl , and give the three means of realization of opengl : software implementation , hardware realization and graphics accelerate mode , and has been penetrated into the acquirement to the architectural structure of opengl 本文重點研究了計算機圖形處理和面向?qū)ο蟮姆抡婕夹g(shù)在鉆井模擬器可視化仿真上的應用。對計算機圖形處理進行了較為詳盡的研究并給出了部分實現;詳細闡述了基于opengl的圖形處理的特點,給出opengl的三種實現方式:軟件實現、硬件實現和三維圖形加速模式,并對opengl的體系結構進行了深入探討。
Measuring engine transient process data in ca1258p1k2l11t1 truck in accelerated mode , recording and analyzing the data , then analysis the test error . 4 . building model and simulating two typical running mode ? fixed 6th gear acceleration with initial vehicle speed 40km / h and gear change acceleration starting with 2nd gear , comparing calculated result with test result , revising transient process simulation model and analyzing error between calculation 本文基于ca1258p1k2l11t1載重卡車對ca6df2 - 26發動機的瞬變工況進行試驗和模擬計算,結果表明: 1 ) gt - power軟件可以很好的模擬、分析、預測發動機瞬變過程,模擬計算的結果與試驗結果很接近,試驗證明,預測分析指出的改進方向是正確的; 2 )加裝電動增壓器可以降低整車使用油耗,改善低速煙度排放,縮短加速時間,改善整車的加速響應; 3 ) gt - power軟件預測分析配合發動機和整車試驗是分析、解決發動機瞬變過程的有力工具。